• Xenox M90

  • mobile x-ray system
  • Xenox M90 is a mobile x-ray unit designed for radiological examinations at the patient’s bed and in the Emergency Room with a touch screen control panel to display and set the radiographic parameters.

  • Different generator power from 30 to 40kw
  • Rotting anode with 3000 rpm
  • 1ms min exposure time
  • 6300ms max exposure time
  • 250 to 400 mAs
  • 125 kV voltage
  • Anode made of RTM
  • 0.6 to 0.75mm small focus
  • 1.25to 1.3mm large focus
  • Manual operation
  • 43x43cm Rad field
  • 6 cassettes storage
  • Touch screen 10.4” TFT display
  • Collimator with laser pointer and pediatric filter

  • Protection and automatic control of filament current
  • Protection from over current and over voltage (kv, ma)
  • Protection from maximum load of x-ray tube
  • Operator error or malfunctioning indication
  • Swiveling front wheels in anti-static rubber
  • Big rear wheels ø 43,5cm
  • Dead-man brake system
  • Container for 6 x-ray cassette
  • Variable focus-floor distance 60-202cm
  • Rotation of monoblock supporting fork +90° / -180°
  • Rotation of monoblock in fork 0° / +90°

 

  • Perfect distribution of the weight in the equipment, the center of gravity is in an ideal position to make the equipment easy to handle and move. 
  • Xenox M90 can easily overcome small obstacles, such as the difference in level between the bottom of the elevator and the hallway 
  • The "dead man” brake system, instead of the usual foot brake, is a passive safety device that is engaged if the device is accidentally released during downhill transportation 
  • Its limited overall dimensions allow the operator to have good visibility during transportation and when passing through the small doors of older hospital structures 
  • Thanks to the handle with off-center rotation the equipment is easy to position anywhere
  •  The rotation function of the arm in relation to the vertical axis has an automatic return device that reduces the extension, thus guaranteeing the stability of the equipment in any standard position of use
  •  The particular geometry of the supporting arm of the radiological source enables the use of this equipment even in neonatal and adult intensive care units, where maneuvering spaces are usually limited because they are occupied by the lifesaving equipment
  •  The control desk is controlled by a microprocessor with digital display of the radiological parameters
  •  It allows for an easy and rapid interpretation and selection of the examination parameters through the TFT touch screen
  •  The control software developed in windows® environment can be updated using a standard pc with serial port
  •  The innovative control functions include the thermal units of the x-ray tube, the filament current.
  • The three-size examination modality selection (human anatomical figure), automatic control of exposure times, the setting of the examination parameters with three-point (kv, ma, s) or two-point (kv, mas) technique and the three-speed selection on the supporting screen
  •  The technology used to create the man-machine interface (an innovation compared to the standard market products), improves the operational performances of the device
  •  The arm has an articulated joint with double four-bar linkage system, balanced independently,
    the function of the arm group is to support the radiogenic source hanging over the operating space and keep it at right angle with the examination surface.
  •  The attractive design and the colors have been chosen to limit the emotional impact on the patient taking into account the ergonomic features linked with the practical use of the unit